Table of Contents
Advertisement
1. Connecting the Machine
2.
Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port.
1
3.
Connect the other end of the Ethernet interface cable to a network connection device such
as a hub.
4.
Turn on the main power switch of the machine.
1.
2.
1. Indicator (green)
When 10BASE-T is operating, the LED is lit green. When 100BASE-TX is operating it is turned
off.
2. Indicator (yellow)
When 100BASE-TX is operating, the LED is lit yellow. When 10BASE-T is operating, it is turned
off.
• For details about how to turn on the main power switch, see "Turning On the Power", About This
Machine.
14
BJM104S
BJM002S
Advertisement
Table of Contents
