Table of Contents
Advertisement
3. Tray Paper Settings
Apply Duplex is enabled only when you select [At Mode Selected] in Display Time.
Front Cover:
You can specify and display the paper tray to set front cover sheets. You can also specify the display
time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Apply Duplex
You can select [Yes] or [No].
3
Apply Duplex is enabled only when you select [At Mode Selected] in Display Time.
Back Cover:
You can specify and display the paper tray to set back cover sheets. You can also specify the display
time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Apply Duplex
You can select [Yes] or [No].
Apply Duplex is enabled only when you select [At Mode Selected] in Display Time.
Slip Sheets:
You can specify and display the paper tray in which to set slip sheets. You can also specify the display
time.
• Display Time
You can select [At Mode Selected] or [Full Time].
Separation Sheets:
You can specify and display the paper tray in which to set separation sheets. You can also specify
the display time.
• Display Time
You can select [At Mode Selected] or [Full Time].
Interposer (Upper Tray / Lower Tray)
Paper Size:
Select the size of the paper loaded in the Interposer.
This menu appears only when the Interposer is installed.
The paper sizes you can set for Interposer are as follows:
76
Advertisement
Table of Contents
