Table of Contents
Advertisement
Stamp on Designating Slip Sheet
You can select to print the page number onto slip sheets when using the Designate function set to
"Copy" and the Page Numbering function together.
The default setting is Off.
Stamp Position
Specify how each of stamp is printed.
• Stamp Position
Specify where to print the stamp.
• Adjust Stamp Position
You can adjust the position of the stamp within the available ranges shown below.
• Metric version:
"Top Left" T/B: 4-144mm, L/R: 4-144mm
"Top Center" T/B: 4-144mm, L/R: 72-72mm
"Top Right" T/B: 4-144mm, L/R: 4-144mm
"Bottom Left" T/B: 4-144mm, L/R: 4-144mm
"Bottom Center" T/B: 4-144mm, L/R: 72-72mm
"Bottom Right" T/B: 4-144mm, L/R: 4-144mm
• Inch version:
"Top Left" T/B: 0.1"-5.7", L/R: 0.1"-5.7"
"Top Center" T/B: 0.1"-5.7", L/R: 2.8"-2.8"
"Top Right" T/B: 0.1"-5.7", L/R: 0.1"-5.7"
"Bottom Left" T/B: 0.1"-5.7", L/R: 0.1"-5.7"
"Bottom Center" T/B: 0.1"-5.7", L/R: 2.8"-2.8"
"Bottom Right" T/B: 0.1"-5.7", L/R: 0.1"-5.7"
Superimpose
You can have page numbers printed in white when they overlap black parts of the image.
The default setting is Off.
Stamp Color
Sets the selected priority color when printing the page number.
The default setting is Black.
Page Numbering Initial Letter
You can select the page numbering initial letter between "P1, P2.../P.1, P.2..." and "S1, S2.../S.1,
S.2...".
The default setting is P1,P2.../P.1,P.2....
Stamp
4
97
Advertisement
Table of Contents
