Table of Contents
Advertisement
ADF Feed Speed
When you use thick paper, you can slow down the printing speed to avoid fusing the image by
selecting [slow].
The default setting is Normal.
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or control panel is pressed
continuously.
The default setting is Normal.
Z-fold Position
If you specify Z-folding, set the fold-back position in 1 mm (0.1") increments.
The setting ranges of the folding position for each paper size are shown below:
• Metric version
• A3: 2-25 mm
• B4 JIS: 2-40 mm
• A4: 2-10 mm
• 11 17: 2-20 mm
1
• 8
/
14: 2-35 mm
2
• Inch version
• A3: 0.1"-1.0"
• B4 JIS: 0.1"-1.6"
• A4: 0.1"-0.4"
• 11 17: 0.1"-0.8"
1
• 8
/
14: 0.1"-1.4"
2
The default setting is 2 mm (Metric version) / 0.1" (Inch version).
• p.9 "Accessing User Tools"
Output Tray Settings
• You cannot interrupt the current stapling job even if a stapling job is specified by a different function.
• When the optional finisher is installed and stapling or shift-sorting is specified, the job will be delivered
to the finisher shift tray regardless of the output tray specified.
General Features
2
35
Advertisement
Table of Contents
