Table of Contents
Advertisement
2. System Settings
12.
Enter the search base, and then press [OK].
For example, if the search target is the sales department of ABC company, enter "dc=sales department,
o=ABC". (In this example, the description is for an active directory. "dc" is for the organization unit,
and "o" is for the company.)
Search base registration may be required depending on your server environment. When registration
is required, unspecified searches will result in error.
2
Check your server environment and enter any required specifications.
13.
Press [Change] under "Port Number".
Specify the port number for communicating with the LDAP server. Specify a port that is compliant with
your environment.
14.
Enter the port number using the number keys, and then press the [ ] key.
When SSL is set to [On], the port number automatically changes to "636".
15.
Press [On] under "Use Secure Connection (SSL)".
Use SSL to communicate with the LDAP server.
To use SSL, the LDAP server must support SSL.
When SSL is set to [On], the port number automatically changes to "636".
SSL setting must be enabled on this machine. For details, consult your network administrator.
16.
Press [ Next].
17.
Press [On] or [High Security] under "Authentication".
To make a search request to the LDAP server, use the administrator account for authentication.
Authentication settings must comply with your server's authentication settings. Check your server
settings before setting this machine.
[High Security] is available only with LDAP Version 3.0.
When [High Security] is selected, the administrator password is encrypted before it is sent to the
network. When [On] is selected, the password is sent without out encryption.
18.
Press [ Next].
58
Advertisement
Table of Contents
