Table of Contents
Advertisement
6. Registering Addresses and Users for Scanner Functions
• When [Do not Specify] is selected for LDAP Authentication, the User Name and Password that you
have specified in Program / Change LDAP Server of Administrator Tools settings applies. For details,
see "Programming the LDAP server".
1.
Press [System Settings].
2.
Press [Administrator Tools].
6
3.
Press [Address Book Management].
4.
Check that [Program / Change] is selected.
5.
Press the name you want to register or enter the registered number using he number keys.
You can search by the registered name, folder name, or e-mail address.
6.
Press [Auth. Info], and then press [ Next].
7.
Press [Specify Other Auth. Info] under "LDAP Authentication".
8.
Press [Change] under "Login User Name".
9.
Enter the login user name, and then press [OK].
10.
Press [Change] under "Login Password".
11.
Enter the password, and then press [OK].
12.
Enter the password again to confirm, and then press [OK].
13.
Press [OK].
164
Advertisement
Table of Contents
