Table of Contents
Advertisement
Scanner Auto Reset Timer (scanner)
Specify the time to elapse before the scanner function resets.
If [Off] is selected, the machine will not automatically switch to the user code entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is On, 60 second(s).
Set Date
Set the date for the copier's internal clock using the number keys.
To change between year, month, and day, press [ ] and [ ].
Set Time
Set the time for the copier's internal clock using the number keys.
Enter the time using the 24-hour format (in 1 second increments).
To change between hours, minutes and seconds, press [ ] and [ ].
Auto Logout Timer
Specify whether or not to automatically log out a user when the user does not operate the machine
for a specified period of time after logging in.
The time can be set from 60 to 999 seconds, in one second increments, using the number keys.
The default setting is On, 180 second(s).
Weekly Timer Code
Set a password (using not more than eight digits) for turning on the power during the time periods
when "Weekly Timer" turns off the machine's power.
In order to make this setting, administrator authentication must be enabled. For details, consult your
administrator.
The default setting is Off.
If you have selected "On", enter the password.
When you select "On", you cannot use the machine even if you turn the power switch to "On", unless
you enter the password.
If you select "Off", you do not have to enter a password to switch on the machine, you need only turn
the power switch to "On".
Weekly Timer: Monday - Sunday
Set the daily time when the power is switched on/off.
• Power On Time
• Power Off Time
Enter the time using the 24-hour system.
Enter the "hour" and "minute" using the number keys.
Timer Settings
2
37
Advertisement
Table of Contents
