Table of Contents
Advertisement
Tray 1
Paper Size:
The paper sizes you can set for Tray 1 are as follows:
1
A4 , 8
/
×11
2
Paper Type:
Sets the display so you can see what type of paper is loaded in the paper tray.
The paper types you can set for the Paper Tray 1 are as follows:
No Display, Recycled Paper, Color Paper1, Color Paper2, Yellow, Green, Blue, Purple, Ivory,
Orange, Pink, Red, Gray, Letterhead, Preprinted Paper, Bond Paper, Card Stock, Prepunched Paper,
Special Paper 1, Special Paper 2, Special Paper 3, Special Paper 4, Special Paper 5, Special Paper
6, Envelope
Paper Thickness:
The paper thicknesses you can set for the Paper Tray 1 are as follows:
• Thin Paper
2
(60-75 g/m
)
• Plain Paper
2
(76-100 g/m
• Middle Thick
(101-126 g/m
• Thick Paper 1
(127-156 g/m
• Thick Paper 2
(157-220 g/m
The default setting for "Paper Type" is No Display.
The default setting for "Paper Thickness" is Plain Paper.
The default setting for "Apply Duplex" is Yes.
The default setting for "Apply Auto Paper Select" is Yes.
The key mark is displayed next to the paper tray if [No] is selected in [Apply Auto Paper Select].
Auto Paper Select can only be selected for the copier function if [No Display] and [Recycled Paper]
are selected. If [No] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper
Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This
Machine.
)
2
)
2
)
2
)
Tray Paper Settings
3
63
Advertisement
Table of Contents
