Table of Contents
Advertisement
6. Registering Addresses and Users for Scanner Functions
14.
Press [FTP].
15.
Press [Change] under "Server Name".
16.
Enter the server name, and then press [OK].
17.
Press [Change] under "Path".
18.
Enter the path, and then press [OK].
You can enter an absolute path, using this format: "/user/ home/username"; or a relative path, using
this format: "directory/sub-directory".
6
If you leave the path blank, the login directory is assumed to be the current working directory.
You can also enter an IPv4 address.
You can enter a path using up to 128 characters.
19.
To change the port number, press [Change] under "Port Number".
20.
Enter the port number using the number keys, and then press the [ ] key.
You can enter 1 to 65535.
21.
Press [Connection Test] to check the path is set correctly.
22.
Press [Exit].
If the connection test fails, check the settings, and then try again.
23.
Press [OK].
24.
Press [Exit].
25.
Press the [User Tools] key.
• To register the name, see "Registering Names".
• You can enter up to 64 characters for the user name.
• You can enter up to 64 characters for the password.
• You can enter a server name using up to 64 characters.
• If User Authentication is specified, contact your administrator.
140
Advertisement
Table of Contents
