Table of Contents
Advertisement
Back Cover:
You can specify and display the paper tray to set back cover sheets. You can also specify the display
time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Apply Duplex
You can select [Yes] or [No].
Apply Duplex is enabled only when you select [At Mode Selected] in Display Time.
Slip Sheets:
You can specify and display the paper tray in which to set slip sheets. You can also specify the display
time.
• Display Time
You can select [At Mode Selected] or [Full Time].
Separation Sheets:
You can specify and display the paper tray in which to set separation sheets. You can also specify
the display time.
• Display Time
You can select [At Mode Selected] or [Full Time].
Tray 3 and 4
Paper Size:
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for Tray 3, 4 are as follows:
Auto Detect, A3 , A4 , A4 , A5 , B4 JIS , B5 JIS , B5 JIS , SRA3 , 12×18 , 11×17 ,
11×15 , 11×14 , 10×15 , 10×14 , 8
1
1
8
/
×14 , 8
/
×13 , 8×13 , 8×10 , 7
4
4
Custom Size
You can specify a custom size of between 139.7 - 330.2 mm (5.5" - 13.0") vertically, and between
184.1 - 487.7 mm (7.25" - 19.2") horizontally.
The default setting is Auto Detect.
Paper Type:
Sets the display so you can see what type of paper is loaded in each paper tray.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the Paper Tray 3 and 4 are as follows:
1
1
/
×14 , 8
/
×13 , 8
2
2
1
1
1
/
×10
/
, 7
/
×10
4
2
4
Tray Paper Settings
1
1
/
×11 , 8
/
×11 ,
2
2
1
1
1
/
, 5
/
×8
/
,
2
2
2
3
69
Advertisement
Table of Contents
