Reset Menu; Info Menu (Display Only) - Epson EB-L25000U User Manual

List of Functions
Submenu
Art-Net Art-Net: Set this to On to control the projector using Art-Net.
s "About Art-Net"
Net/Sub-Net/Universe: Sets the projector's Net/Sub-Net/
Universe.
Start Channel: Sets the start channel that handles Art-Net.
s "Channel definitions"
Message Broad- You can switch the Message Broadcasting function to enable or
disable.
casting
You can download Message Broadcasting and its Operation
Guide from the following Web site.
http://www.epson.com

Reset menu

Resets all of the network settings.
Submenu
To reset all of the Network settings, select Yes.
Reset network
settings.
Function
p.200
p.200
Function

Info Menu (Display Only)

Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected.
Submenu
Projector Info Total Op.
Time *
Operation
Hours
Source
Input Signal
Resolution
Refresh Rate
Function
Displays the projector's cumulative
operating time.
Displays the operation time after turning on
the projector.
You can display the source name for the
connected equipment currently being
projected.
You can display the content of Input
Signal set in the Signal menu according to
the source.
You can display the resolution.
g
You can display the Refresh Rate
136
.