Configuring The Network Interface Board - Toshiba e-studio905 Operating Instructions Manual

Hide thumbs Also See for e-studio905:
Table of Contents

Advertisement

User
Print request user name.
Page
Number of pages printed
Result
Print Request Result
Communication Result
• OK
Print was completed normally. However, the print result may not be as required due to printer
problems.
• NG
Printing was not completed normally.
• Canceled
A "rcp", "rsh", or "lpr" command print request was canceled, possibly due to the printing
application. Not applicable to the "ftp" or "rprinter" command.
Time
Time the print requested was received.
Time of print request reception
User ID (when designating Job ID on telnet)
Printer driver-configured User ID.
Appears when the print request ID is specified.
JobName (when designating Job ID on telnet)
Name of the document for printing
Appears when the print request ID is specified.

Configuring the Network Interface Board

Use the following command to display network interface board settings:
• telnet : Use the "show" command.
Common
Item
Mode
Protocol Up/Down
Understanding the Displayed Information
Description
Protocol Settings
5
231

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio1105E-studio1355

Table of Contents