Table of Contents
Advertisement
• Min.: -0.3 %
• Step: 0.1 %
The default setting is "0" %.
• Back Side
• Max.: 0.4 %
• Min.: -0.4 %
• Step: 0.1 %
The default setting is "0" %.
• Settings specified for the front side of sheets are applied to both the front and back side of each sheet;
settings specified for the back sides of sheets are applied only to the back side of each sheet.
• If settings for both the front and back sides of sheets are specified, the magnification setting for the
back side of each sheet is determined based on the value specified for "front side".
• If the magnification value for the back side are different from those specified as the default, duplex
printing speed might be lowered.
0106: Select Test Pattern for Image Position Adjustment
Select the test image used when adjusting the image position.
• Copy Image
The scanned image is printed.
• Frame Image
The framed image is printed. The scanned image will not be printed.
0107: Adjust Toner Fusing Temperature
Adjust the toner fusing unit temperature according to the paper type/thickness. A higher temperature
produces improves toner fixation. A lower Temperature reduces paper curl and corrugation but
degrades toner fixation.
• Normal
• Higher
• High
• Lower
• Low
The default setting is "Normal".
0108: Adjust Paper Feed Speed
When using non-standard paper such as thick paper or special paper, select a paper feed speed
that is suitable for the paper type.
Adjustment Settings for Operators
8
315
Advertisement
Table of Contents
