Table of Contents
Advertisement
• Min.: -4.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 4 Holes Type EU
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 4 Holes Type NE
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 2 Holes Type US
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
0501: Adjust Z-fold Position 1
Adjust the width of the bottom end segment (s) of Z-fold sheets when using the optional Multi-Folding
Unit. Press [+] to make the end segment wider, or [-] to make it narrower.
The
mark indicates the leading edge (relative to the paper feed direction), and the
the trailing edge.
• A3
• Max.: 4.0 mm
BRU022D
Adjustment Settings for Operators
mark indicates
8
329
Advertisement
Table of Contents
