Table of Contents
Advertisement
5. Monitoring and Configuring the Printer
SMTPC: no smtp server. connection close.
Connection to the SMTP server failed due to no response from SMTP. This could be because a server other
than the SMTP server has been specified, or the specified SMTP server port number is incorrect. Check the
SMTP server name, port number, or the SMTP server port number.
SMTPC: failed to connect smtp server.
Connection to the SMTP server failed. This could be because no connection to the network has been
established, or the network configuration is incorrect, so there is no response from the SMTP server, or the
specified SMTP server name is incorrect, or the specified SMTP server IP address could not be found in the
DNS server, or a server other than the SMTP server has been specified, or the specified SMTP server port
number is incorrect. Check the DNS Server's IP address and SMTP server's IP address, or the SMTP server
name and SMTP port number, or the SMTP server's SMTP port number, or the network connection and
configuration.
SMTPC: username or password wasn't correct. [response code] (information)
5
Connection to the SMTP server failed, because the specified SMTP user name is incorrect, or the specified
SMTP password is incorrect. Check the SMTP user name and password.
Snmp over IPv4 is ready
Communication over IPv4 with snmp is available.
Snmp over IPv6 is ready.
Communication over IPv6 with snmp is available.
Snmp over IPX is ready.
Communication over IPX with snmp is available.
The print server received error <error number> during attempt to log in to the network. Access
to the network was denied. Verify that the print server name and password are correct.
Login to the file server failed when the print server was online. The print server is not registered or a password
is specified. Register the print server without specifying a password.
trap account is unavailable.
v3Trap cannot be sent. This could be because the Trap destination account is different from the account
specified by the printer.
Updated (option name) (value) via DHCPv6 Server
The parameter obtained from the DHCP server has been updated.
WINS name registration: No response to server (WINS server address)
There was no response from the WINS server. Check that the correct WINS server address is entered.
Also, check that the WINS server is functioning properly.
246
Advertisement
Table of Contents
