Table of Contents
Advertisement
• Min.: -1.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
1
• 8
/
11
2
• Max.: 1.0 mm
• Min.: -1.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 8K
• Max.: 1.0 mm
• Min.: -1.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 16K
• Max.: 1.0 mm
• Min.: -1.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 16K
• Max.: 1.0 mm
• Min.: -1.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• Other Paper Sizes
• Max.: 1.0 mm
• Min.: -1.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
0304: Adjust Punch Position Across Feed Dir. / Booklet Finisher
Adjust the horizontal position of the punch holes when using the optional booklet finisher. Press [+] to
move the position forward (up), or [-] to move it backward (down).
• 2 Holes Type JP / EU
• Max.: 2.0 mm
Adjustment Settings for Operators
8
327
Advertisement
Table of Contents
