Table of Contents
Advertisement
2. Tray Paper Settings
Separation Sheet Tray
You can specify and display the paper tray in which to set slip sheets. You can also specify the display
time.
• Display Time
You can select [At Mode Selected] or [Full Time].
2
Tray 5 (with the optional Large Capacity Tray)
Paper Size
You can select the size of the paper loaded in the optional large capacity tray (LCT).
This menu appears only when the LCT is installed.
The paper sizes you can set for Tray 5 (with the optional LCT) are as follows:
• [Auto Detect]
1
• 5
/
×8
2
1
• 8
/
×11 , 5
2
You can specify a custom size. To use a custom size paper on this tray, additional setup is required.
For details, contact your service representative.
The default setting is Auto Detect.
• For details about paper sizes that can be automatically detected, see "Recommended Paper
Sizes and Types", About This Machine.
Paper Type
You can set the display so you can see what type of paper is loaded in the paper tray.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the Paper Tray 5 (with the optional LCT) are as follows:
[Do not Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Yellow],
[Green], [Blue], [Purple], [Ivory], [Orange], [Pink], [Red], [Gray], [Letterhead], [Translucent Paper],
[Preprinted Paper], [Bond Paper], [Cardstock], [OHP (Transparency)], [Prepunched Paper], [Label
Paper], [Tab Stock]
Paper Thickness
The paper thicknesses you can set for Tray 5 (with the optional LCT) are as follows:
• Plain Paper
52 - 105 g/m
• Middle Thick
106 - 163 g/m
80
1
/
, A5
2
1
1
/
×8
/
, A4 , A5 , B5 JIS
2
2
2
(14 - 28 lb BOND)
2
(28 lb BOND - 90 lb INDEX)
Advertisement
Table of Contents
