Table of Contents
Advertisement
7.
Click [OK].
8.
Click [Configuration], and then click [Interface Settings] in the "Interface" area.
9.
Select [Active] in "Ethernet Security".
10.
Click [OK].
11.
Click [Logout].
12.
Quit the Web Image Monitor.
• If there is a problem with settings, you might not be able to communicate with the printer. To identify
the problem, print a network summary.
• If you cannot identify the problem, reset the printer interface to normal, and then repeat the procedure
from the beginning.
Configuring IEEE 802.1X
367
8
Advertisement
Table of Contents
