Network Card Setup; Configuring Network Settings - Toshiba e-STUDIO 332s User Manual Advanced

Windows Utilities
Select language and click [Next].
4
Select the model and click [OK].
5
Read the user license agreement and
6
click [I Agree].
Select [Device Configuration].
7
Click [Change the Printer Display
8
Language].
Check [Country Code] and click [Next].
9
Click on [Next].
10
Select the model name of the machine
11
and click on [Next].
Select the country code and click on [Next].
12
Click on [Setup].
13
Setup the date and time
(e-STUDIO403S only)
Hold down the power switch for about a
1
second to turn on the power.
Plug in the computer, and insert the
2
Software DVD-ROM.
Click [Run setup.exe].
3
If the [User Account Control] dialog box
appears, click [Yes].
Select language and click [Next].
4
Select the model and click [OK].
5
Read the user license agreement and
6
click [I Agree].
Select [Device Configuration].
7
Click [Change the Printer Display
8
Language].
Check [Date and Time] and click [Next].
9
Click on [Next].
10
Select the model name of the machine
11
and click on [Next].
Set the date and time and click on [Next].
12
Click on [Setup].
13

Network Card Setup

You can use the Network Card Setup to configure
the network.
In order to use Network Card Setup, TCP/IP
needs to be activated.
Note
This requires administrator rights.
Memo
To check the machine MAC address, press the <SETTINGS>
key, and on the machine operating panel select [View
Information]>[Network].
Launching the Utility
Hold down the power switch for about a
1
second to turn on the power.
Turn on you computer, and insert the
2
Software DVD-ROM.
Click [Run setup.exe].
3
User Account Control]
If the [
appears, click [
Select the device and click [Next].
4
Read the user license agreement and
5
click on [I Agree].
Select [Device Configuration]>
6
[Network Card Setup Utility].

Configuring Network Settings

Launch Network Card Setup.
1
Select the machine from a list.
2
Select [Setting Printer] from the
3
[Setting] menu.
Change the items as required and click
4
on [OK].
Enter your password into [Password]
5
and click on [OK].
- The default password is the last 6 alphanumerical
digits of the Ethernet address.
- The password is case sensitive.
- 120 -
dialog box
Yes
].