Table of Contents
Advertisement
8. Appendix
Change this setting if adjusting [Adjust Toner Fusing Temperature] setting does not produce satisfactory
results.
• Normal
• Slower
• Slow
The default setting is "Normal".
• The speed settings that are available vary according to the model series of your machine:
• Pro907 series: "Normal" only.
• Pro1107 series: "Normal" or "Slower" can be selected.
0109: Double Feed Detect
Specify whether or not to detect double or multiple sheet feeds. Setting can be made for each tray
independently. If "On" is selected, the machine detects double or multiple sheet feeds, preventing
blank sheets being mixed into the output paper.
If you are using special paper such as released paper, malfunctions might occur. If this happens,
select "Off" and disable this function.
• Tray 1
• On
• Off
8
The default setting is "On".
• Tray 2
• On
• Off
The default setting is "On".
• Tray 3
• On
• Off
The default setting is "On".
• Tray 4
• On
• Off
The default setting is "On".
• Tray 5
• On
316
Advertisement
Table of Contents
