Table of Contents
Advertisement
Accessing User Tools
This section describes how to access User Tools menu.
User Tools allow you to change or set defaults.
• Operations for system settings differ from normal operations. Always quit User Tools when you have
finished.
• Any changes you make with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Energy Saver] or [Clear Modes] key is pressed.
Changing Default Settings
This section describes how to change the settings of User Tools.
• If Administrator Authentication Management is specified, contact your administrator.
1.
Press the [User Tools] key.
2.
Press [System Settings].
3.
Select the user tool you want to change.
4.
Change settings by following instructions on the display, and then press [OK].
• To cancel changes made to settings and return to the initial display, press the [User Tools] key.
• For details about specifying System Settings, see "System Settings".
• For details about specifying other settings such as changing the language, checking inquiry and
counter, see "Remarks", About This Machine.
CCJ005
17
Advertisement
Table of Contents
