Table of Contents
Advertisement
7. Special Operations under Windows
2.
Enter the user name and password, and then press the [Enter] key.
For details about the user name and password, consult your network administrator.
User:
Password:
When user authentication is set, enter a login user name and password.
3.
When printing a binary file, set the file mode to binary.
ftp> bin
When printing a binary file in ASCII mode, print may not come out correctly.
4.
Specify files to be printed.
The following shows the examples of printing a PostScript file named "file 1" in the "C:\PRINT"
directory and printing file 1 and file 2.
ftp> put C:\PRINT\file1 filetype=RPS
ftp> mput C:\PRINT\file1 C:\PRINT\file2
5.
Quit ftp.
ftp> bye
7
• "=", ",", "_", and ";" cannot be used for filenames. File names will be read as option strings.
• If you are using ftp, you cannot specify an option using the "mput" command.
• If you are using ftp, you cannot specify an option using the "pwd" command.
• If you are using sftp, you cannot specify an option using the "cd" command.
• If you are using sftp, you cannot specify an option using the "pwd" command.
• To use SFTP, you must create an open key for SSH communication. Use Web Image Monitor to create
an open key. For details, see Web Image Monitor help on the supplied CD-ROM.
• If personal authentication (Basic, Windows, LDAP, or Integrated Server Authentication) is enabled,
only authenticated users (users authenticated by login user name and password) can log on.
• For "mput" command, "*" and "?" can be used as wild cards in file names.
• When printing a binary file in ASCII mode, print may not come out correctly.
• For details about login user name and password, see Security Reference, which is the administrator's
manual.
• For details about the virtual printer configuration, see "Using the Virtual Printer", Printer Reference.
308
Advertisement
Table of Contents
