Table of Contents
Advertisement
5. Monitoring and Configuring the Printer
syslog
Use the "syslog" command to display the information stored in the printer's system log.
View message
msh> syslog
• p.241 "Message List"
upnp
Use the "upnp" command to display and configure the universal plug and play.
Public URL display
5
msh> upnp url
Public URL configuration
msh> upnp url "string"
• Enter the URL string in the character string.
web
Use the "web" command to display and configure parameters on Web Image Monitor.
View Settings
msh> web
URL Configuration
You can set URLs linked by clicking [URL] on Web Image Monitor.
msh> web "ID" url http:// "The URL or IP address you want to register"/
Specify "1" or "2" for ID as the number corresponding to the URL. Up to two URLs can be registered
and specified.
Resetting URLs registered as link destinations
msh> web "ID" clear url
Specify "1" or "2" for ID as the corresponding number to the URL.
Link name configuration
You can enter the name for URL that appears on Web Image Monitor.
msh> web "ID" name "Name you want to display"
Specify "1" or "2" for ID the corresponding number to the link name.
206
Advertisement
Table of Contents
