Table of Contents
Advertisement
8. Appendix
• Min.: -2.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 3 Holes Type US
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 4 Holes Type EU
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 4 Holes Type NE
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
8
• 2 Holes Type US
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
0305: Adjust Punch Position With Feed Dir. / Booklet Finisher
Adjust the horizontal position of the punch holes when using the optional booklet finisher. Press [+] to
move the holes toward the top edge (left), and [-] to move them toward the bottom edge (right) relative
to the paper feed direction.
• 2 Holes Type JP / EU
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 3 Holes Type US
• Max.: 4.0 mm
328
Advertisement
Table of Contents
