Table of Contents
Advertisement
Paper size
A3, B4JIS, A4, 11 × 17,
1
1
8
/
× 14, 8
/
× 11, Others
2
2
Double Parallel Fold Position
You can adjust the position of the lines of the double parallel fold in steps of 1 mm.
Paper size
A3, B4JIS, A4, 11 × 17,
1
1
8
/
× 14, 8
/
× 11, Others
2
2
Gate Fold Position
You can adjust the position of the lines of the gate fold in steps of 1 mm.
Paper size
A3, B4JIS, A4, 11 × 17,
1
1
8
/
× 14, 8
/
× 11, Others
2
2
Output Tray Setting
Use this setting to switch output tray selection between Function-dependant Tray Select and Auto Tray
Select.
This setting appears only when two or more stacker trays are attached to the machine.
You can select the "[Auto Change] is available for Output Tray, only when [Job Order] is selected at
Print Priority".
If you often make copies with different settings for each page, specify a high value for this setting to
avoid other jobs starting before the current job is finished.
This setting appears only when more than one output tray is attached.
Paper Curl Correction Level
You can specify the level of paper curl correction.
• p.17 "Accessing User Tools"
Output Tray Settings
Note that default settings can vary by machine model.
Setting ranges
2 – 7 mm
(0.1 – 0.3 in)
Setting ranges
-10 – 10 mm
(-0.4 – 0.4 in.)
Setting ranges
2 - 12 mm
(0.1 – 0.5in.)
General Features
Factory-set values
4 mm (0.2 in.)
Factory-set values
0 mm (0 in.)
Factory-set values
4 mm (0.2 in.)
1
23
Advertisement
Table of Contents
