Table of Contents
Advertisement
5. Monitoring and Configuring the Printer
Setting login mode for NDS tree name
msh> netware tree "NDS tree name"
File transfer protocol
msh> netware trans {ipv4pri|ipxpri|ipv4|ipx}
• If you do not specify the protocol, the current setting is displayed.
ipv4pri
ipxpri
ipv4
ipx
5
passwd
Use the "passwd" command to change the remote maintenance password.
Changing the password
msh> passwd
• Enter the current password.
• Enter the new password.
• Re-enter the new password to confirm it.
Changing the password of the administrators using the Supervisor
msh> passwd {Administrator ID}
• Enter the new password.
• Re-enter the new password to confirm it.
• Be sure not to forget or lose the password.
• The password can be entered using up to 32 alphanumeric characters. Characters are case-sensitive.
For example, "R" is not the same as "r".
pathmtu
Use the "pathmtu" command to display and configure the PathMTU Discovery service function.
192
Protocol
Set Protocol
IPv4+IPX (IPv4)
IPv4+IPX (IPX)
IPv4
IPX
Advertisement
Table of Contents
