Connecting For 4K Processing; Single Input To Single Output - Extron electronics DSC HD-HD 4K Plus A Series User Manual

Hdmi to hdmi 4k scalers
Hide thumbs Also See for DSC HD-HD 4K Plus A Series:
Table of Contents

Advertisement

I
Tip
Ring
Sleeves
Tip
Ring

Connecting for 4K Processing

Input and output connections to the DSC HD-HD 4K Plus A Series can vary depending on
the capability of your source or sink to process signals at 4K resolution on a single cable.

Single Input to Single Output

For a single-input to single-output configuration, the source must be capable of passing a
4K signal on a single cable (see the example in figure 8).
Blu-ray Player
Figure 8.
If the sink will be displaying output at 4K as well, it must also be capable of receiving a 4K
signal on a single cable.
Audio output connector — Connect powered speakers or another audio output
device to this 5-pole captive screw connector for analog output as shown in figure 7.
Sleeves
Balanced Audio Output
Figure 7.
Wiring the Audio Output Connector
ATTENTION:
For unbalanced audio, connect the sleeves to the ground contact. Do not
connect them to negative (–) contacts.
Pour l'audio asymétrique, connectez les manchons au contact au sol. Ne
PAS connecter les manchons aux contacts négatifs (–).
The length of the exposed wires in the stripping process is critical. The ideal
length is 3/16 inch (5 mm). If the exposed portion is longer, the wires may
touch, causing a short circuit between them. If the exposed wires are shorter,
they can be easily pulled out, even if tightly fastened by the captive screws.
La longueur des câbles exposés est primordiale lorsque l'on entreprend
de les dénuder. S'ils sont un peu plus longs, les câbles exposés pourraient
se toucher et provoquer un court circuit. S'ils sont un peu plus courts, ils
pourraient sortir, même s'ils sont attachés par les vis captives.
Do not tin the wires. Tinned wire does not hold its shape and can become
loose over time.
Ne pas étamer les câbles. Les câbles étamés ne sont pas aussi bien fixés
dans les terminaisons des connecteurs à vis captives et pourraient sortir.
100-240VAC ~ -- A MAX
50-60 Hz
DSC HD-HD 4K Plus A
3840 x 2160 @ 60Hz
with Embedded
Audio
Single 4K Video Input to Single Output
No Ground Here
Tip
Tip
No Ground Here
Unbalanced Audio Output
AUDIO IN
INPUT
OUTPUT
L
R
L
R
HDMI
HDMI
AUDIO OUT
1080p @ 60Hz
with Embedded
Audio
DSC HD-HD 4K Plus A Series • Installation
Do not tin the wires!
LAN
REMOTE
RS -232
RESET
Tx Rx G
Display
10

Advertisement

Table of Contents
loading

Table of Contents