Table of Contents
Advertisement
HDCP Authorized — Select whether or not the scaler input will report to a source as
•
an HDCP authorized device, thereby allowing HDCP-encrypted content. The default
is
.
On
•
Auto Memory — Select this item to enable or disable Auto Memories. When Auto
Memories are enabled, the DSC automatically stores the current input configuration
and picture control values as a preset in one of its 32 Auto Memory locations (see
Auto Memories
•
Aspect Ratio — Select this item to specify whether input signals will fill the entire
output raster (
ratio of the input signal (
Test Pattern — Select this item to choose a test pattern to aid in setting up the
•
DSC and the corresponding output display. Available pattern selections are:
test pattern),
and
Audio Test
default is
•
Output Audio Format — Select between stereo and dual mono. The default is
Stereo
Picture Controls Submenu
This submenu lets you adjust the horizontal and vertical positions, height and width,
brightness, contrast, and sharpness (
Figure 22.
on page 39 for more information). The default is
), or be automatically compensated to follow the native aspect
Fill
). The default is
Follow
,
Crop
Alternating Pixels
(displays a crop pattern and outputs 48 kHz, 24-bit pink noise). The
.
Off
.
Detail
Picture Controls Submenu
.
Fill
,
,
Crosshatch
Color Bars
) of the image on the display.
DSC HD-HD 4K Plus A Series • Operation
.
On
(no
Off
,
,
Grayscale
23
Advertisement
Table of Contents
