Table of Contents
Advertisement
DSC HD-HD 4K Plus A Series Web Page
The embedded
to monitor and adjust certain settings of the DSC through its Ethernet port, connected
via a LAN or WAN and using a Web browser such as Microsoft
factory-installed Web page is always available and cannot be erased or overwritten.
Accessing the Web Page
To access the HTML page:
1.
2.
3.
DSC HD-HD 4K Plus A or DSC HD-HD 4K Plus A xi
In the
field of your Web browser, enter the IP address of your unit. To obtain
Address
this address, do either of the following:
Press the front panel
•
Menu
current IP address is the fourth item in the right panel.
Enter the
View IP address
•
SIS
Commands, beginning on page 42, for information on entering these
commands.
NOTE: If the local system administrators have not changed the IP address, use
the factory-specified default
Press the <Enter> key. The DSC checks to see if the Web page is password
protected.
If the unit is not password protected, the Web page opens.
•
If the unit is password protected, the
•
opens (see figure 38).
Figure 38.
Example of a Network Password Dialog Box
If an administrator or user password is required, enter
field and the password in the
Name
DSC HD-HD 4K Plus A Series • Remote Configuration and Control
button and select the
Communications
SIS command: E
} on page 66. See
CI
in this field.
192.168.254.254
Authentication Required
admin
field. Click
Password
Log In
Web page enables you
Internet Explorer
. This
®
®
submenu. The
dialog box
or
in the
user
User
.
76
Advertisement
Table of Contents
