Software And Firmware; Signal Processing Products Control Program; Installing The Sppcp - Extron electronics RGB-DVI 300 User Manual

Software and
Firmware
This section of the manual discusses:
•
•

Signal Processing Products Control Program

All the features of the RGB-DVI 300, RGB-HDMI 300, and RGB-HDMI 300 A that can be
controlled by SIS commands, can also be controlled by a computer that is running the Signal
Processing Products Control Program (SPPCP).

Installing the SPPCP

The control program is available on the disk provided. It can also be downloaded from the
Extron Web site (www.extron.com).
The minimum system requirements for installing the program on the computer are:
Operating system — Microsoft
CPU — Intel
Hard disk space — 10 MB
Memory — 256 MB of RAM
Device connection — Serial Com Port
When the installation program has been located on the Extron Software Product disk or the
Extron Web site, double click to start it and follow the on-screen instructions to download
and install the program.
Signal Processing Products Control Program (SPPCP)
Firmware Upgrades
Pentium II processor with a 400 MHz clock speed
® ®
RGB-DVI 300 and RGB-HDMI 300 (A) • Software and Firmware
® Windows ® 2000 or later
23