Signal Processing Products Control Program; Installing The Software; Installation From The Dvd - Extron electronics DVS 304 User Manual

Signal Processing
Products Control
Program
The Extron Signal Processing Products Control Program (SPPCP) offers another way to
control the DVS 304 via RS-232 or Ethernet connection in addition to the SIS commands.
This section describes SPPCP installation, communication, and control. Topics that are
covered, include:
•
•
•
The program's graphical interface includes the same functions as those on the scaler's
front panel with additional features that are only available through the software.
The control software is compatible with Windows 98, Windows NT, Windows 2000, and
Windows XP. The Signal Processing Products Control Program is included on the Extron
DVD, and updates can be downloaded from the Extron Web site (http://www.extron.com).
NOTE: The control program require approximately 32 MB of hard disk space.

Installing the Software

The SPPCP software can be installed onto the hard drive of a connected PC either directly
from the supplied DVD, or downloaded from the Extron Web site.

Installation from the DVD

1.
NOTE: The DVD starts only if you have a DVD drive on your PC.
The Extron software window appears.
2.
Installing the Software
Starting the SPPCP
Using the SPPCP
Insert the DVD into the applicable drive. The DVD self starts.
If the disc does not start automatically, run LAUNCH.EXE from the disc.
DVS 304 Series • SPPCP 54