Extron electronics DSC HD-HD 4K Plus A Series User Manual page 76

Command
Password and Security Settings (continued)
Set user password
24
Clear user password
24
View user password
24
Ethernet Data Port
NOTES:
•
If no data is received during the timeout period the Ethernet connection is closed.
•
With an RS-232 or USB connection, only the global timeout commands apply. A current connection timeout
command returns error code E13.
Set current connection
port timeout period
13
View current connection
port timeout period
13
Set global IP port timeout
View global IP port
timeout
X7*
NOTE: = Administrator or user password, 12 characters maximum. / \ | * and space characters are not
allowed. Passwords are case-sensitive.
X7(
= Baud rate for serial port
X8)
= Parity for serial port
X8!
= Stop bits for serial port
X8@
= Data bits for serial port
X8$
= Number of seconds (stated in tens of seconds) before timeout on IP connections:
Minimum = 1 (10 seconds), maximum = 65000 (650,000 seconds), default = 30 (300 seconds).
Each step = 10 seconds. Response contains leading zeros.
ASCII Command Response
(Host to Scaler) (Scaler to Host)
E X7* }
CU Ipu •
E }
• CU Ipu •
E }
CU ****
With tagged responses
(verbose modes 2 and 3):
Ipu ****
E X8$ }
0 * TC Pti 0 *
E } X8$ ]
0 TC
With tagged responses
(verbose modes 2 and 3):
Pti 0
E X6( }
1 * TC Pti 1 *
E } X8$ ]
1 TC
With tagged responses
(verbose modes 2 and 3):
Pti 1
DSC HD-HD 4K Plus A Series • Remote Configuration and Control
Additional Description
X7* ]
Set password
Passwords are case-sensitive.
] Remove the user password from
the unit.
The actual password cannot
]
be viewed. Four asterisks are
returned instead. If there is no
password, **** is omitted from
]
the response.
Set number of seconds (in tens
X8$ ]
of seconds) before timeout on
the current IP connection only.
X8$
= 1 through 65000.
Default is 30 = 300 seconds =
5 minutes.
View the current timeout setting.
X8$ ]
Set number of seconds (in tens
X8$ ]
of seconds) before timeout on all
IP connections from this unit.
X8$
= 1 through 65000.
Default is 30 = 300 seconds =
5 minutes.
View the current global timeout
setting.
X8$ ]
X7*
for the unit.
68