Table of Contents
Advertisement
The following picture settings can be adjusted:
•
Auto-Image — Select this item, then press
on the video input (see
function).
•
Image Position — Select this item to adjust the horizontal and vertical position of the
image on the display. The ranges are:
Horizontal position:
•
Vertical position:
•
Image Size — Select this item to adjust the horizontal size (width) and vertical size
•
(height) of the image. The ranges are:
Horizontal size:
•
10
Vertical size:
through
•
10
•
Brightness — Select this item to adjust the black level of the video signal. The range
is
through
. The default is
0
127
•
Contrast — Select this item to adjust the range of white to black levels of the video
signal. The range is
through
0
•
Detail — Select this item to adjust the image sharpness. The range is
default is
).
64
NOTE: An asterisk (*) before a value on a screen indicates that it is the default.
Adjusting the picture controls
When you select a
Picture Controls
item is displayed alone on the screen to facilitate adjustment (see figure 23). The separate
item field contains yellow arrows that indicate which front panel arrow buttons to press to
adjust the item.
Image Position
Figure 23.
Example of a Selected Picture Controls Submenu Item
After selecting the item to adjust, do the following:
1.
With the separate item field displayed, use the arrow buttons to select and adjust the
desired settings as indicated by the yellow arrows on the screen. (To rapidly increment
or decrement the values, press and hold the arrow button.)
Example: In figure 23, the yellow right and left arrows next to the
that you can press the
To adjust the vertical position, press the
and down arrows next to the
2.
When finished, press
Enter
Enter
Auto-Image
on page 37 for more information about this
through
pixels
-4096
+4096
through
lines
-2160
+2160
through
of signal
8192
of signal
4320
.
64
. The default is
127
64
submenu item, the
H: 0000 V: 0000
and
buttons on the front panel to adjust the horizontal position.
t
and
buttons, as indicated by the yellow up
setting.
V
to return to the
menu.
OSD
DSC HD-HD 4K Plus A Series • Operation
to perform a one-time Auto-Image
.
to
0
127
menu collapses so that the
OSD
setting indicate
H
. The
24
Advertisement
Table of Contents
