Extron electronics DSC HD-HD 4K Plus A Series User Manual page 86

Input panel:
•
If the input signal is HDCP encrypted, the
•
displays a closed lock icon followed by
right).
If the input signal is NOT HDCP encrypted, the
•
displays an open lock icon (
If no device is connected to the HDMI input, the input status field
•
displays a dash (
Output panel:
•
If the attached sink is HDCP compliant, the output status field displays a
•
lock icon with a check mark (
If the sink is non-HDCP compliant, this field displays an open lock icon
•
with an X on it.
If no device is connected to the output connector, the output status field
•
displays a dash (
NOTE: Figure 40 shows an
non-xi model. The
two inputs and outputs.
Communication Settings — This panel contains the current TCP/IP and RS-232
B
connection settings. It also has an
editing. The RS-232 settings are view-only and cannot be changed.
Editing the TCP/IP settings
1. In the
Communication Settings
click the button. The following dialog box opens:
Edit
Figure 41. Communication Settings Dialog Box
2. Enter the desired settings in the
fields (see figure 41,
Gateway
you to edit these fields.
Alternatively, select the
address from a DHCP server.
If you want to reset all IP settings to their factory defaults, click
, then click
Default
3. Click to confirm the settings and close the dialog box.
Apply
DSC HD-HD 4K Plus A Series • Remote Configuration and Control
HDCP
).
2
).
—
).
4
).
—
panel for a DSC HD-HD 4K Plus A,
HDMI Status
panel for the xi model displays information for
HDMI Status
button that lets you access the IP settings for
Edit
panel (see figure
,
IP Address Subnet Mask
). The
2
Use DHCP
checkbox (
1
Use DHCP
on the confirmation prompt that opens.
Reset
status field
Input
(see the illustration at
status field
Input
39, , on the previous page)
B
, and
Default
checkbox must be cleared for
) to have the unit obtain its IP
Reset to
78