Extron electronics DSC HD-HD 4K Plus A Series User Manual page 59

Hdmi to hdmi 4k scalers
Hide thumbs Also See for DSC HD-HD 4K Plus A Series:
Table of Contents

Advertisement

X7@
= Audio output mute
1 = Local 5-pole captive screw analog audio output
2 = Embedded TMDS audio output
X7$
= Label key effect
0 = Disabled
1 = Transparency
2 = RGB key
3 = Level key
4 = Alpha key
X7%
=
IP address (nnn.nnn.nnn.nnn). Leading zeros in each of the four octets are optional in
setting values and are suppressed in returned values.
Factory default address (when DHCP is turned off) is 192.168.254.254.
X7^
= Subnet mask (nnn.nnn.nnn.nnn). Leading zeros are optional in setting values in each of
the four octets, and are suppressed in returned values.
X7&
= Gateway IP address (nnn.nnn.nnn.nnn). Leading zeros are optional in setting values in
each of the four octets, and are suppressed in returned values.
X7*
= Password (12 characters maximum) The following characters are not allowed:
/ \ | * and {space}. Passwords are case-sensitive.
NOTE:
A user password cannot be assigned if no administrator password exists.
An E14 error code is returned. If the administrator password is cleared, the user
password and all extended security level passwords are also removed.
X7(
= Serial port baud rate
X8)
= Serial port parity
X8!
= Serial port number of data bits
X8@
= Serial port number of stop bits
X8#
= Hardware (MAC) address (xx-xx-xx-xx-xx-xx)
X8$
= (Ethernet only) Number of seconds (stated in tens of seconds) before timeout on IP
connections
Minimum = 1 (10 seconds)
Maximum = 65000 (650,000 seconds)
Default = 30 (300 seconds)
Each step = 10 seconds
The response contains leading zeros.
If no data is received during the timeout period, the Ethernet connection is closed. When
the unit is connected via RS-232 or USB, only the global timeout commands apply.
Anything else returns an E13 error code.
X8%
= Local date and time
Set format: MM/DD/YY-HH:MM:SS
Example: 06/21/15-10:54:00
{day of the week}
View format: Www
Example: Fri, 26 Sep 2015 18:19:33
X8^
= Greenwich Mean Time (GMT) offset value (-12:00 through 14:00) in hours and
minutes (hh:mm)
X8&
=
A 2- to 6-digit code, such as "PST" for GMT - 8.00
=
X8*
UTC offset and location name, such as (UTC-08:00) Pacific Time for PST
DSC HD-HD 4K Plus A Series • Remote Configuration and Control
, DD Mmm YYYY HH:MM:SS
51

Advertisement

Table of Contents
loading

Table of Contents