Extron electronics DSC HD-HD 4K Plus A Series User Manual page 40

To use this submenu, press
step through the selections.
• Audio Mute — Select this item to mute and unmute the output audio. You can make
the following audio mute selections:
— No audio output is muted (default).
• Off
— Mutes the analog audio output only.
• Analog
— Mutes the embedded digital audio output only.
• Digital
— Mutes both the analog and the embedded digital audio outputs.
• On
Input Audio Format — Select this item to choose the audio format for the input. The
•
first item on the
Audio
Audio Format
Selection
Configures input EDID with no audio support. All audio outputs
None
are muted.
Configures input EDID with no audio support. Analog audio
Analog Audio
from the 5-pole captive screw input is embedded into the
HDMI output.
Configures input EDID for LPCM-2Ch support. Passes all
LPCM-2Ch
digital audio input signals to the HDMI outputs. If LPCM-2Ch
audio is present it is also de-embedded to the 5-pole captive
screw analog output.
Configures input EDID for Multi-Ch support. Passes all digital
Multi-Ch
audio input signals to the HDMI outputs. If LPCM-2Ch audio
is present it is also de-embedded to the 5-pole captive screw
analog output.
Configures input EDID for LPCM-2Ch support. Passes all
LPCM-2Ch Auto
digital audio input signals to the HDMI outputs. If LPCM-2Ch
audio is present it is also de-embedded to the analog 5-pole
captive screw output.
If no embedded audio is present on the input the DSC passes
analog audio from the 5-pole captive screw input.
Configures input EDID for Multi-Ch support. Passes all digital
Multi-Ch Auto
audio input signals to the HDMI outputs. If LPCM-2Ch audio
is present it is also de-embedded to the analog 5-pole captive
screw output. If no embedded audio is present on the input,
the DSC passes analog audio from the 5-pole captive screw
input.
Output Audio Format — Select this item to specify stereo or dual mono (
•
the analog audio output. Press
buttons to toggle between the two formats. The default is
Analog Gain — Select this item to set the analog input gain value. Press
•
select this item, then press the
1 dB increments. The range is
Volume — Select this item to set the volume level in decibels for both the analog and
•
embedded digital audio outputs. Press

buttons to raise or lower the volume in increments of 1 dB. The range is
through . The default is
0 dB
to select this item, then press the
Enter
menu shows the selected format of the audio.
Details
to select this item, then press the
Enter

or buttons to increase or decrease the gain in

through
-18 dB +24 dB
to select the item, then press the
Enter
.
-10 dB
DSC HD-HD 4K Plus A Series • Operation

or buttons to

) for
Mono

or

.
Stereo
Enter
. The default is .
12 dB

-100 dB
to
or
32