Extron electronics DSC HD-HD 4K Plus A Series User Manual page 58

X4( = Unsolicited signal or HDCP status responses
0 = Disabled
1 = Enabled
X5)
= Output volume
0 dB to -100 dB in 1.0 dB steps. Default is -10 dB.
Response is 3 digits padded with a leading + or – (examples: +000, -010).
X5!
= Audio output format
1 = Dual mono
2 = Stereo (default)
X5$
= Audio input gain
-18 dB to +24 dB. Default is 12 dB.
Response is 2 digits padded with a leading
X5*
= Audio input format
0 = None. Audio is muted.
1 = Analog
2 = LPCM-2Ch
3 = Multi-Ch
4 = LPCM-2Ch Auto (default)
5 = Multi-Ch Auto
X6!
= Video signal status
0 = Video signal not detected
1 = Video signal detected
X6@
= Power save modes
0 = Full power mode (default)
1 = Low power mode
9 = Low power due to overheating (response to query only)
X6#
= Screen saver status
0 = Active input detected, timer not running
1 = No active input detected, timer running, output sync active
2 = No active input detected, timer expired, output sync disabled
X6$
= Input lock (AFL) setting
0 = Disable input lock. Free running pixel clock is generated internally (default).
1 = Enable input lock. Locks the output vertical rate to the vertical refresh rate of the
input.
X6% = Input lock (AFL) status
0 = Input lock (AFL) disabled
1 = Input lock (AFL) enabled, but cannot lock to applied input signal. The DSC defaults to
the current output rate and a free running pixel clock.
2 = Input lock (AFL) enabled, output locked to the applied input signal
X6^
= Input HDCP Authorized status
0 = HDCP Authorized disabled
1 = HDCP Authorized enabled (authenticated to the highest possible encryption
supported) (default)
X6(
= Hot plug change or detect
1 = A new sink has been connected.
2 = A sink has been disconnected.
X7)
= Key effect variable for logo
0 = Transparency (available only when
1 = Red of RGB key (available only when
2 = Green of RGB key (available only when
3 = Blue of RGB key (available only when
4 = Level key (available only when
5 = Alpha key
X7!
= Key effect setting for logo
0 to 255
DSC HD-HD 4K Plus A Series • Remote Configuration and Control
zero
.
X7$
= 1)
X7$
= 2)
X7$
= 2)
X7$
= 2)
X7$
= 3)
50