Delete Iproute; Show Iproute - D-Link DGS-1210/ME series Reference Manual

delete iproute

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the default Gateway from the routing table:
DGS-1210-28P/ME:5# delete iproute
Command: delete iproute
Success.
DGS-1210-28P/ME:5#

show iproute

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the contents of the IP routing table:
DGS-1210-28P/ME:5# show iproute
Command: show iproute
Routing Table
IP Address/Netmask Gateway
---------------------------- --------------- -------------
Total Entries :1
DGS-1210-28P/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to delete an IP route entry from the Switch's IP routing table.
delete iproute {default}
The delete iproute command will delete an existing IP route entry
from the Switch's IP routing table.
{default} – Specifies to delete a default IP route entry.
Only Administrator, operator and power user-level users can issue
this command.
Used to display the Switch's current IP routing table.
show iproute {<ipaddr> | static}
The show iproute command will display the Switch's current IP
routing table.
<ipaddr> - Enter the IP address used here.
static – Specifies to display all the static routes.
None.
10.0.0.0/8 0.0.0.0
Interface Hops Protocol
------- --------------
System 1 Local
359