Config Address_Binding Auto_Scan Ipv6Address; Delete Address_Binding - D-Link DGS-1210/ME series Reference Manual

config address_binding auto_scan ipv6address

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure address binding auto scan on the Switch:
DGS-1210-28P/ME:5#
from_ip 3000::1 to_ip 3000::3
Command: config address_binding auto_scan ipv6address from_ip 3000::1
to_ip 3000::3
Success.
DGS-1210-28P/ME:5#

delete address_binding

Purpose
Syntax
Description
Parameters
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to configure an IP-MAC-port binding auto scan for specified
IPv6 addresses.
config address_binding auto_scan ipv6address from_ip
<ipv6addr> to_ip <ipv6addr>
The config address_binding auto_scan command is used to
configure the IP-MAC-port binding auto scan for specified IPv6
addresses.
<ipv6addr> − Specifies a range of IPv6 addresses for address
binding auto scan on the Switch.
Only administrator or operate-level users can issue this command.
config
Used to delete IP-MAC-port binding entries.
delete address_binding [ip_mac [ipaddress <ipaddr> |
ipv6address <ipv6addr> | mac_address <macaddr> | all] |
blocked [all | vlan_name <string 32> mac_address <macaddr>
port <port 1-28>]]
The delete address_binding command is used to delete IP-MAC-
port binding entries. Two different kinds of information can be
deleted.
ip_mac – Individual address binding entries can be deleted by
entering the physical and IP addresses of the device. Toggling to all
will delete all the address binding entries.
blocked – Blocked address binding entries (bindings between VLAN
names and MAC addresses) can be deleted by entering the VLAN
name and the physical address of the device. To delete all the
blocked address binding entries, toggle all.
ipaddress <ipaddr> – The IPv4 address of the device where the IP-
MAC-port binding is made.
iv6paddress <ipv6addr> – The IPv6 address of the device where the
IP-MAC-port binding is made.
<macaddr> – The MAC address of the device where the IP-MAC-
port binding is made.
vlan_name <string 32> – The VLAN name of the VLAN that is bound
to a MAC address in order to block a specific device on a known
VLAN.
all – For IP-MAC-port binding all specifies all the IP-MAC-port
binding entries; for blocked address binding entries all specifies all
the blocked VLANs and their bound physical sddresses.
address_binding auto_scan
69
ipv6address