Show Tech Support - D-Link DGS-1210/ME series Reference Manual

Parameters
Restrictions
Example usage:
To display time range settings on the Switch:
DGS-1210-28P/ME:5# show time_range
Command: show time_range
Time Range Information
------------------------------------------------------------------
Range Name
Weekdays
Start Time
End Time
From Day
To Day
DGS-1210-28P/ME:5#

show tech support

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display technical support information on the Switch:
DGS-1210-28P/ME:5# show tech support
Command: show tech support
- Stacktrace Log -
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
configuration.
<range_name 20> – Specifies the time range name to be displayed.
None.
: dd
: Tue Wed Thu Fri
: 00:22
: 12:34
: 2012/01/01
: 2012/01/03
To display system and configuration information. to provide to the
Technical Assistance Center when reporting a problem, use the
show tech-support command.
show tech support
show
The
configuration information. to provide to the Technical Assistance
Center when reporting a problem.
By default, this command displays the output for technical-support-
related show commands. Use keywords to specify the type of
information to be displayed. If you do not specify any parameters,
the system displays all configuration and memory data.
The show tech support command may time out if the configuration
file output takes longer to display than the configured session
timeout time. If this happens, enter a set logout timeout value of 0 to
disable automatic disconnection of idle sessions or enter a longer
timeout value.
The show tech support command output is continuous; it does not
display one screen at a time. To interrupt the output, press Esc.
None.
None.
tech support
command
34
displays system and