Show Mac_Based_Vlan Mac Address; Config Vlan_Auto_Learn - D-Link DGS-1210/ME series Reference Manual

Restrictions
Example usage:
To delete a static MAC-based VLAN entry:
DGS-1210-28P/ME:5# delete mac_based_vlan mac_address 00-00-00-11-22-
33 vlan default
Command: delete mac_based_vlan mac_address 00-00-00-11-22-33 vlan
default
Success.
DGS-1210-28P/ME:5#

show mac_based_vlan mac address

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the static or dynamic MAC-based VLAN entry:
DGS-1210-28P/ME:5# show mac_based_vlan mac_address 00-00-00-11-22-33
Command: show mac_based_vlan mac_address 00-00-00-11-22-33
MAC Address
------------------------ ------------------------------
00-00-00-11-22-33 FF-FF-FF-FF-FF-FF 1
Total Entries : 1
DGS-1210-28P/ME:5#

config vlan_auto_learn

Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Only Administrator and Operator and Power-User-level users can
issue this command. .
To show the static or dynamic MAC-based VLAN entry.
show mac_based_vlan mac_address <macaddr> [ mask
<macmask 000000000000-ffffffffffff> | vlan <vlan_name 32> |
vlanid <vlanid 1-4094>]
The show mac_based_vlan mac address command is used to
display the static or dynamic MAC-Based VLAN entry. If the MAC
address and VLAN is not specified, all static and dynamic entries will
be displayed.
<macaddr> - Specifies the MAC address to be displayed.
<macmask 000000000000-ffffffffffff> - Specifies the MAC mask to be
displayed.
<vlan_name 32> - Specifies the VLAN name.
<vlanid 1-4094> - Specifies the VLAN id.
None.
MAC Address Mask
To configure MAC address autolearning on a VLAN to be enabled or
disabled.
config vlan_auto_learn vlanid <vidlist> [enable | disable]
VLAN ID Status Type
-------------- ---------- --------
Active Static
236