Visual Manager User Interface
Utility Menu tasks:
Each Utility Menu option is discussed in the following sections.
Beacon Mode Configuration
The Beacon Configuration screen is used to enable and disable the router Beacon
mode. When enabled, the Power LED located on the back-side of the router will
continuously blink, alternating between amber and green.
To enable the Beacon settings, select the ON checkbox and then click Submit.
Figure 58
92
Beacon configuration enables the Beacon mode.
FTP Utility access opens an FTP session.
Trace Settings configuration configures trace settings.
Current Traces display shows current trace information.
Previous Traces display shows previous trace information.
Last Assert Traces display shows last assert trace information.
Clear Current Traces clears current trace information.
Clear Assert Traces clears assert trace information.
Event Log Settings configures Event Log settings.
Event Log display shows the Event Log.
Clear Event Log clears the Event Log.
is an example of the Beacon settings screen.
Network Storage Router M2402 User Guide