Serial/Telnet User Interface - HP M2402 User Manual

Serial/Telnet User Interface

The Serial/Telnet User Interface (UI) is used to configure and manage the
StorageWorks Network Storage Router M2402. This chapter describes the
configuration menus and option tasks available in the Serial/Telnet UI.
Note:
reboots.
During the start up process of the router, the Serial/Telnet UI displays initial
power-up messages. After the power-up process is completed, the main menu of
the UI is displayed. Within the router main menu, several configuration menus and
tasks are listed. All configuration and management tasks are performed from these
menus.
This chapter is organized using the same structure as the router main menu and its
associated sub-menus. The sections are:
Network Storage Router M2402 User Guide
Unless otherwise indicated, configuration changes take effect when the router
Telnet UI access
Serial UI access
Power up messages
Serial/Telnet main menu
Configuration menu
Baud Rate configuration
Ethernet and SNMP configuration
World Wide Node Name configuration
Modules configuration
— Configuring Fibre Channel modules
— Configuring SCSI modules
5
105