Editing Host Information - HP M2402 User Manual

Editing Host information

To change host information, select Edit (E).
Current host information is displayed on the screen. The system will display a
series of prompts, allowing changes to be entered.
Note:
Figure 94
Figure 94: Editing Host information on a Fibre Channel module
Figure 95
Network Storage Router M2402 User Guide
To retain the current information for a prompt, press Enter at the prompt.
is an example of editing host information for a Fibre Channel module.
is an example of editing host information for a SCSI module.
Serial/Telnet User Interface
147