Functional Overview
The router translates the Fibre Channel Protocol (FCP) to and from the SCSI
Protocol. It transfers commands, data, and status information to and from Fibre
Channel controllers and SCSI devices.
Supported devices include:
The router provides multiple Fibre Channel to SCSI I/O configurations. A sample
configuration is illustrated in
FC Host
Figure 9: Example configuration
Figure 9
tape drive and library through the appropriate SCSI bus of the router I/O module.
Network Storage Router M2402 User Guide
Initiator Devices – Fibre Channel and SCSI hosts
Direct Access Devices – RAID Controllers, Disk drives, JBODs
Sequential Access Devices – Tape drives
Changer Devices – Tape and Magneto-Optical Libraries
Fibre Channel
SCSI
shows that a Fibre Channel host on the Fibre Channel bus can access a
Figure
9.
SCSI
Tape
Drives
SCSI
Tape
Libraries
StorageWorks
Router
SCSI
Tape
Libraries
SCSI
Tape
Drives
Introduction
9