Port priority configuration commands
qos priority
Syntax
qos priority priority-value
undo qos priority
View
Interface view, port group view
Default level
2: System level
Parameters
priority-value: Port priority value, in the range of 0 to 7.
Description
Use qos priority to change the port priority of a port.
Use undo qos priority to restore the default.
The default port priority is 0.
To view the port priority of a port, use the display qos trust interface command.
Settings in interface view take effect on the current interface. Settings in port group view take effect on all
ports in the port group. Settings in subinterface view take effect on the current subinterface.
In respect to subinterfaces, only the subinterfaces on SPE cards support the qos priority command.
Examples
# Set the priority of GigabitEthernet 2/1/1 to 2.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/1/1
[Sysname-GigabitEthernet2/1/1] qos priority 2
Priority trust mode configuration commands
display qos trust interface
Syntax
display qos trust interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
77