Fibre Alliance Mib; Setting Router Statistics; Setting Basic Router Information - HP M2402 User Manual

SNMP Management Information Bases

Fibre Alliance MIB

The router supports the Fibre Alliance MIB, version 2.2. The Fibre Alliance is an
industry consortium dedicated to implementing standard methods of management
for SAN environments. The Fibre Alliance MIB has been submitted to the IETF
for review as of September 14, 1999, but is has not yet been adopted as an IETF
standard. For further information, contact a systems services representative, go to
the Fibre Alliance website, or go to the IETF website.
Note:
http://www.ietf.org.
The router provides the following support for the Fibre Alliance MIB, version 2.2:

Setting Router Statistics

Some of the router settings include the router name, port names, port connections,
and SNMP traps. Up to three network-management trap stations can be set.
The next sections of this appendix discuss:

Setting Basic Router Information

Router basic information settings include the router name and information,
contact information, and location information.
To set basic router information:
1. Access the Fibre Alliance MIB.
2. Go to the connUnitTable in the Fibre Alliance MIB.
3. Go to the connUnitName leaf.
222
Fibre Alliance is located at
Setting router statistics
Viewing the router Event Log
Setting Basic Router Information
Setting Port Name Information
Setting SNMP Trap IP Addresses
http://www.fibrealliance.org
Network Storage Router M2402 User Guide
and IETF is located at