Adding A Map Entry To A Scsi Map - HP M2402 User Manual

Adding a Map Entry to a SCSI Map

To add a new entry to a SCSI map:
1. In the Edit Map Entries screen, select Add (A).
Figure 86: Adding an Entry to a SCSI map
2. Enter a Target/LUN ID combination.
Note:
Network Storage Router M2402 User Guide
The following screen is displayed.
If the selected Target/LUN is already present in the map, a prompt is
displayed that asks to either confirm the override or enter different address
information.
A device selection list is automatically generated.
Devices cannot be mapped to their native port.
Serial/Telnet User Interface
139