Serial/Telnet User Interface
Adding a Host to the Host List
To add a host to the Host List, select Add (A).
If the host is an FCP host, the Host Name, Host ID, port WWN, and Node WWN
for FCP host must be entered. (WWN values are hexidecimal.)
Figure 92
of a FCP host.
Figure 92: Adding a Host to the Host List - FCP host
If the host is a SCSI host, the host name and the initiator ID must be entered.
Figure 93
of a of a SCSI host.
Figure 93: Adding a Host to the Host List - SCSI host
Deleting a Host from the Host List
To remove a host from the Host List, select Delete (D). After entering the number
of the host to delete, a confirmation prompt is displayed.
146
is an example of the screen display when adding a host to the Host List
is an example of the screen display when a host is added to the Host List
Network Storage Router M2402 User Guide