Removing Gaps In The Map - HP M2402 User Manual

Serial/Telnet User Interface
Figure 89: Creating an Entry for a SCSI map
Note:
WWN, and LUN ID must be entered.
Note:
message will be displayed.

Removing Gaps in the Map

To remove any incremental gaps in the sequence of LUN listed in the table, in the
Edit Map Entries screen, select Remove (R).
As the system removes any gaps from the table, the LUN are renumbered in
sequential order, starting with LUN 0.
142
If the device being added is a Fibre Channel device, the Node WWN, Port
If this device is a duplicate of a device currently present in the device list, an error
Network Storage Router M2402 User Guide